D&D 5e Jump Distance & Falling Damage Calculator
Enter your Strength score to see how far and how high your character can jump, with or without a run-up, and how high you can reach. Below, work out falling damage and the exact chance that a fall knocks you out.
Jumping
Falling damage
How jumping works
Your Strength decides how far you can jump. The basic rules are the same in the 2014 and 2024 editions:
- Long jump: you cover a number of feet up to your Strength score if you move at least 10 feet on foot immediately before the jump. From a standing start you cover only half that distance.
- High jump: you leap into the air a number of feet equal to 3 + your Strength modifier (minimum 0) after a 10-foot run-up, or half that from a standing start.
- Movement: each foot you clear in a jump costs a foot of movement. If you run out of movement mid-jump, you can’t finish it on that turn.
- Reach: at the top of a high jump you can stretch your arms half your height above you, so you can reach your jump height plus one and a half times your height.
A character with 14 Strength (+2) can long-jump 14 feet and high-jump 5 feet with a run-up, or 7 feet and 2½ feet from standing.
Jump distance by Strength
| Strength | Running long jump | Standing long jump | Running high jump | Standing high jump |
|---|---|---|---|---|
| 8 (−1) | 8 ft | 4 ft | 2 ft | 1 ft |
| 10 (+0) | 10 ft | 5 ft | 3 ft | 1.5 ft |
| 12 (+1) | 12 ft | 6 ft | 4 ft | 2 ft |
| 14 (+2) | 14 ft | 7 ft | 5 ft | 2.5 ft |
| 15 (+2) | 15 ft | 7.5 ft | 5 ft | 2.5 ft |
| 16 (+3) | 16 ft | 8 ft | 6 ft | 3 ft |
| 18 (+4) | 18 ft | 9 ft | 7 ft | 3.5 ft |
| 20 (+5) | 20 ft | 10 ft | 8 ft | 4 ft |
| 22 (+6) | 22 ft | 11 ft | 9 ft | 4.5 ft |
| 24 (+7) | 24 ft | 12 ft | 10 ft | 5 ft |
Things that improve jumps
- Athlete feat: you only need a 5-foot run-up for a running jump.
- Jump spell: in the 2014 rules it triples the target’s jump distance for a minute. The 2024 version instead lets the target jump up to 30 feet once on each of its turns by spending only 10 feet of movement.
- Step of the Wind (Monk): doubles your jump distance for the turn.
- Athletics checks: the DM may let you try to jump farther than normal with a Strength (Athletics) check, and may ask for one to clear a low obstacle or land on your feet in difficult terrain.
Falling damage
A creature that falls takes 1d6 bludgeoning damage for every 10 feet it fell, to a maximum of 20d6, and lands prone unless it avoids taking any damage from the fall. Count full 10-foot steps: a 25-foot fall deals 2d6.
| Fall | Damage | Average | Maximum |
|---|---|---|---|
| 10 ft | 1d6 | 3.5 | 6 |
| 20 ft | 2d6 | 7 | 12 |
| 30 ft | 3d6 | 10.5 | 18 |
| 50 ft | 5d6 | 17.5 | 30 |
| 100 ft | 10d6 | 35 | 60 |
| 150 ft | 15d6 | 52.5 | 90 |
| 200 ft | 20d6 | 70 | 120 |
Falls are more dangerous to low-level characters than they look: a 50-foot fall averages 17.5 damage, enough to knock out most 2nd-level wizards. At higher levels even the maximum 20d6 (70 on average) is survivable for a fighter or barbarian. Features such as the Monk’s Slow Fall, the Feather Fall spell and resistance to bludgeoning damage reduce or prevent the damage.
The calculator shows the exact chance that the fall drops you to 0 hit points, worked out from every possible combination of the dice.
Frequently asked questions
How far can you long jump in 5e?
How high can you jump in 5e?
How much falling damage do you take in 5e?
Does jumping use movement?
More for your table
From our sister site Best DnD Generators, free generators for players and DMs:
- Battle map maker — Draw the chasm, cliff or rooftop your character is about to leap.
- Dungeon generator — Generate a dungeon full of pits and ledges to test those jumps.