Combat Math

Spell Save DC and Spell Attack Bonus Explained

The spell save DC and spell attack formulas, how they grow from level 1 to 20, how often monsters fail, and when a save spell beats an attack spell.

Two numbers decide how well a spellcaster’s spells land: the spell save DC, which enemies must meet or beat when they resist your spells, and the spell attack bonus, which you add when a spell makes an attack roll. Both come from the same short formula. This guide explains it, shows how it grows over a career, and looks at how often monsters actually fail.

The two formulas

Spell save DC = 8 + proficiency bonus + spellcasting ability modifier

Spell attack bonus = proficiency bonus + spellcasting ability modifier

Your spellcasting ability depends on your class: Intelligence for wizards, Wisdom for clerics, druids and rangers, and Charisma for bards, paladins, sorcerers and warlocks. Magic items such as a rod, wand or amulet made for your class can add +1 to +3 on top. The formulas are identical in the 2014 and 2024 rules.

A level 1 wizard with 16 Intelligence (+3) and proficiency +2 has a spell save DC of 13 and a spell attack bonus of +5.

How your DC grows from level 1 to 20

Two things raise it: your proficiency bonus, which goes up at levels 5, 9, 13 and 17, and your ability score, which you raise with Ability Score Improvements. A caster who starts with 17 in their spellcasting ability and pushes it to 20 by level 8 follows this path:

LevelAbilityProficiencySave DCSpell attack
117 (+3)+213+5
418 (+4)+214+6
518 (+4)+315+7
820 (+5)+316+8
920 (+5)+417+9
1320 (+5)+518+10
1720 (+5)+619+11

Without magic items, 19 is the highest spell save DC a player character normally reaches. Because of bounded accuracy, monster saving throws grow slowly too, so a DC that is good at level 5 stays relevant for a long time.

How often do creatures fail?

A creature succeeds on its save if d20 + its save bonus is equal to or higher than your DC. So the chance it fails is:

Chance to fail = (DC − save bonus − 1) ÷ 20

With DC 15: a creature with +0 fails 70% of the time, +2 fails 60%, +5 fails 45% and +8 fails 30%. A natural 1 on a saving throw is not an automatic failure, so a creature with a big enough bonus can never fail at all.

Monsters are not equally good at every save. Big brutes such as giants and dragons usually have strong Strength and Constitution saves but weak Intelligence or Charisma saves; spellcasting monsters are often the opposite. Choosing the spell that targets the weak save can turn a 30% chance into a 70% one, which matters far more than +1 to your DC.

Save spells vs attack spells

At most levels the two are surprisingly close. A level 5 caster with DC 15 and +7 to hit:

  • Against a creature with AC 15, a spell attack hits 65% of the time.
  • Against a creature with a +2 save, a save spell succeeds 60% of the time.

The differences are in the details. Attack spells can score critical hits and benefit from advantage; save spells often deal half damage on a success, hit several creatures at once and ignore the target’s armor entirely. Against heavily armored foes with poor saves, save spells shine. Against nimble, high-Dexterity foes with low AC, attack spells do better.

Things that change the odds

  • Magic Resistance gives a creature advantage on saves against spells. A 60% chance to fail becomes 36%.
  • Bane subtracts a d4 (2.5 on average) from the targets’ saves, raising the fail chance by about 12.5 percentage points.
  • Legendary Resistance lets a creature turn a failed save into a success a few times a day. Plan to burn those with cheaper spells first.
  • Conditions such as being restrained give disadvantage on Dexterity saves.

How to raise your DC

  1. Start with the highest spellcasting ability you can: a 15 plus a +2 from your origin for a 17.
  2. Take the Ability Score Improvement or a +1 feat at level 4 to reach 18.
  3. Reach 20 by level 8 if your build allows it.
  4. Look for a class-specific focus item; a +1 to your DC is worth 5 percentage points on every save spell.

The spell save DC calculator works out your DC and spell attack bonus for any class and level, and shows the chance that a target with any save bonus fails.

Sources: System Reference Document 5.1 and 5.2 (CC-BY-4.0) and the fifth edition core rules. Worked examples are our own. First published 7 November 2026. Spotted a mistake? Tell us and we will correct it. Read how we write and check our guides in our editorial policy.